News & Press

Certified aircraft maintenance engineer Jolly Higdon, president of Jolly Time Tools, of Hot Springs, Arkansas, has developed and patented a series of valve spring compressor tools for Lycoming and Continental piston engines. The tools allow mechanics the use of both hands to remove and replace springs, keepers, stems and guides, rocker arms, spacers, push rods, push rod housings and cylinder hold-down nuts.

The Valve Wizard™, mounted to the cylinder on-engine, allows easier access for removal of the parts and in turn, the removal of the cylinder from the crankcase. Valve Wizard’s most valuable asset is time saved on removal and replacement of the cylinders.

The tool was invented by Higdon after years of frustration using the typical lever bars for which constant pressure against the spring must be maintained by one hand, leaving just one hand to access the top-end parts. With Valve Wizard, the cylinders remain bolted to the crankcase while relieving the tension on the springs, saving several hours labor per engine.

Valve Wizard attaches firmly to the cylinder head by use of the rocker cover bolts on each cylinder. Threaded shafts compress the springs and maintain hands-free compression during the process. Both intake and exhaust valves can be worked on at the same time, reducing maintenance time significantly. The tool is designed to allow wide, unobstructed access to the springs, keepers and stems.

“On a typical 4-cylinder engine the time saved will pay for the tool first time out of the box,” says Higdon. “I approached the solution focusing on strength and simplicity, and the result is apparent. Injection-moulded, high-impact plastic with steel inserts and compressors, the Valve Wizard attaches quickly and allows full access to the keepers, guides and stems, on parallel and angle-valve engines.”

The Valve Wizard comes as a kit of three at a price of $429, or $169 each if ordered individually. The tools carry a comprehensive 2 year limited warranty.